Setting Up the Jack

  1. Place the jack under the jacking point closest to the tire to be changed.
  2. Turn the end bracket clockwise (as shown in the image) until the top of the jack contacts the jacking point. Make sure that the jacking point tab is resting in the jack notch.
  3. Raise the vehicle, using the jack handle bar and the jack handle, until the tire is off the ground.
W

The vehicle can easily roll off the jack, seriously injuring anyone underneath.

Follow the directions for changing a tire exactly, and never get under the vehicle when it is supported only by the jack.

Notice Do not use the jack if it doesn't work properly. Call your dealer or a professional towing service.

The following instructions must be followed to use the jack safely: