Honda Sensing®

Models with Low Speed Braking Control

Honda Sensing® is a driver support system which employs the use of three distinctly different kinds of sensors: a radar sensor located behind the Honda emblem on the front grille, a front sensor camera mounted to the interior side of the windshield, behind the rearview mirror, and the sonar sensors located in the front and rear bumpers.

Models without Low Speed Braking Control

Honda Sensing® is a driver support system which employs the use of two distinctly different kinds of sensors: a radar sensor located behind the Honda emblem on the front grille and a front sensor camera mounted to the interior side of the windshield, behind the rearview mirror.

Honda Sensing® has the following functions.

The functions which do not require switch operations to activate

The functions which require switch operations to activate

Operation Switches for the Adaptive Cruise Control (ACC) with Low Speed Follow/Lane Keeping Assist System (LKAS)/Traffic Jam Assist

Button

Press to activate standby mode for ACC with Low Speed Follow.

Or press to cancel the system.

LKAS Button

Press to activate standby mode for LKAS and Traffic Jam Assist.

Or press to cancel these systems.

Interval Button

Press to change the ACC with Low Speed Follow following-interval.

CANCEL Button

Press to cancel ACC with Low Speed Follow.

RES/+/SET/− Switch

Press the RES/+/SET/− switch up to set or resume the ACC with Low Speed Follow or increase the vehicle speed.

Press the RES/+/SET/− switch down to set the ACC with Low Speed Follow or decrease the vehicle speed.

Gauge Content

You can see the current state of Adaptive Cruise Control (ACC) with Low Speed Follow, Lane Keeping Assist System (LKAS) and Traffic Jam Assist.

  1. Indicates that ACC with Low Speed Follow is ready to be activated.
    • Green: The system is on.
    • White: The system is standby.
    • Amber: There is a problem with the system.
  2. Indicates that LKAS or Traffic Jam Assist is ready to be activated.
    • Green: The system is on.
    • White: The system is standby.
    • Amber: There is a problem with the system.
  3. Indicates that LKAS or Traffic Jam Assist is activated and whether or not traffic lane lines are detected.
    • Green lines: The system is on.
    • White lines: Traffic lane lines are detected.
    • Amber line: Lane departure is detected.
  4. Indicates whether or not a vehicle is detected ahead.
  5. Indicates that ACC with Low Speed Follow shows the set vehicle speed.
  6. Indicates that ACC with Low Speed Follow shows the set vehicle interval.
Recommended topic(s)