Brake Light, Taillight, Rear Side Marker Light, and Rear Turn Signal Light Bulbs

When replacing, use the following bulbs.

Brake Light:
LED

Taillight:
LED

Rear Side Marker Light:
LED

Rear Turn Signal Light:
21 W (Amber)
  1. Pry on the edge of the cover using a flat-tip screwdriver to remove the cover.
    • Wrap the flat-tip screwdriver with a cloth to prevent scratches.
  1. Unscrew the bolts.
  1. Grasp underneath the taillight and rotate it upward to release the lower snap pin.
  1. Rotate the taillight outward to release the upper snap pin.
  2. Pull the light assembly out of the rear pillar.
  1. Turn the socket counter-clockwise and remove it.
  2. Remove the old bulb and insert a new bulb.
  3. Align the pins with the body grommets, then push in until they fully seat.
Detail
Brake lights, taillights, and rear side marker lights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.
Recommended topic(s)