Taillight and Back-Up Light Bulbs
When replacing, use the following bulbs.
|
Taillight:
LED Back-Up Light:
16 W
|
-
- Remove the holding clip using a flat-tip screwdriver, then pull the lining back.
-
-
- Turn the socket counter-clockwise and remove it.
- Remove the old bulb and insert a new bulb.
-
- Detail
-
Taillights are LED type. Have an authorized Honda dealer inspect and replace the light assembly.When removing the clip, insert a flat-tip screwdriver, then lift and remove the clip.
Insert the clip with the pin raised, and push until it is flat.
