Replacing the Remote Battery

Models without two-way keyless remote

If the indicator does not come on when the button is pressed, replace the battery.

Battery type:
CR2032
  1. Remove the built-in key.
  1. Pry on the edge of the cover using a flat-tip screwdriver to remove the cover.
    • Wrap the flat-tip screwdriver with a cloth to prevent scratches.
  2. Make sure to replace the battery with the correct polarity.

Models with two-way keyless remote

If the indicator does not come on when the button is pressed, replace the battery.

Battery type:
CR2032
  1. Remove the built-in key.
  1. Pry on the edge of the cover using a flat-tip screwdriver to remove the cover.
    • Wrap the flat-tip screwdriver with a cloth to prevent scratches.
  2. Make sure to replace the battery with the correct polarity.
WARNING

CHEMICAL BURN HAZARD
The battery that powers the remote transmitter can cause severe internal burns and can even lead to death if swallowed.
Keep new and used batteries away from children.
If you suspect that a child has swallowed the battery, seek medical attention immediately.

Detail

NOTICE
An improperly disposed of battery can damage the environment. Always confirm local regulations for battery disposal.


Replacement batteries are commercially available or at a dealer.

Models with two-way keyless remote
NOTICE
The Remote transmitter is equipped with two batteries: A standard replaceable CR2032 coin button battery and an integral non-replaceable rechargeable battery. To prevent permanent damage to the rechargeable battery, replace the CR2032 battery every three to four years.

Recommended topic(s)