Replacing the Remote Battery
If the indicator does not come on when the button is pressed, replace the battery.
-
Battery type: CR2032
- Remove the built-in key.
-
-
- With the buttons facing down, remove the
upper half of the cover by carefully prying
on the slot with the key grip.
- Wrap a key grip with a cloth to prevent scratching the keyless remote.
- With the buttons facing down, remove the
upper half of the cover by carefully prying
on the slot with the key grip.
-
-
- Remove the battery by prying on the edge with flat-tip screwdriver. Make sure to replace the battery with the correct polarity.
- Wrap a flat-tip screwdriver with a cloth to prevent scratching the keyless remote.
- Remove the battery by prying on the edge with flat-tip screwdriver. Make sure to replace the battery with the correct polarity.
-
- WARNING
-
CHEMICAL BURN HAZARD
The battery that powers the remote transmitter can cause severe internal burns and can even lead to death if swallowed.
Keep new and used batteries away from children.
If you suspect that a child has swallowed the battery, seek medical attention immediately.
- Detail
-
NOTICE
An improperly disposed of battery can damage the environment. Always confirm local regulations for battery disposal.
Replacement batteries are commercially available or at a dealer.
