Changing the Wiper Blade Rubber
-
- Lift both wiper arms.
- Press up on and hold the tab, then slide the holder off the wiper arm.
-
-
- Pull the end of the wiper blade in the direction of the arrow in the image until it is out of the holder’s end cap.
-
-
- Pull the wiper blade in the opposite direction to slide it out of the holder.
-
-
- Insert the flat side of the new wiper blade onto the bottom part of the holder. Insert the blade all the way.
- Install the end of the wiper blade into the cap.
- Slide the holder onto the wiper arm until it locks.
- Lower both wiper arms.
- Set the power mode to ON, then set the
wiper switch to the MIST position once.
- The wiper arms return to the standard position.
-
- Detail
-
NOTICE
Avoid dropping the wiper arm onto the windshield, as it may damage the wiper arm and/or the windshield.
