Opening/Closing the Power Windows

The power windows can be opened and closed when the power mode is in ON, using the switches on the doors.

The driver’s side switches can be used to open and close all the windows. The power window lock button on the driver’s side must be switched off to open and close the windows from anywhere other than the driver’s seat.

When the power window lock button is pushed in, the indicator comes on and you can only operate the driver’s window. Turn the power window lock button on if a child is in the vehicle.

  • Driver’s Window Switch

  • Front Passenger’s Window Switch

  • Rear Passenger’s Window Switch

  • Open

  • Close

Manual operation

To open: Push the switch down lightly, and hold it until the desired position is reached.

To close: Pull the switch up lightly, and hold it until the desired position is reached.

Automatic operation

To open: Push the switch down firmly.

To close: Pull the switch up firmly.

The window opens or closes completely. To stop the window at any time, push or pull the switch briefly.

  1. The power windows can be operated for up to 10 minutes after you set the power mode to VEHICLE OFF.
  2. Opening either front door cancels this function.

Auto Reverse

  1. If a power window senses resistance when closing automatically, it will stop closing and reverse direction.

If the auto reverse function is activated due to a malfunction or impact caused by the road surface or driving conditions and the window cannot be closed automatically, you can close it by continuously pulling up the switch briefly.

While driving with any of the windows open, you may hear a booming, throbbing, or helicopter-type noise or pressure. This is called wind buffeting. This is a normal occurrence that can be minimized.

If you hear a wind buffeting noise with any of the windows open, lower all of the other windows slightly or open the panoramic roof* to the comfort position.

WARNING

Closing a power window on someone’s hands or fingers can cause serious injury.

Make sure your passengers are away from the windows before closing them.

  1. The driver’s window auto reverse function is disabled when you continuously pull up the switch.
  2. The auto reverse function stops sensing when the window is almost closed to ensure that it fully closes.

Power Window Lock Button

When the power window lock button is set to ON (indicator on), any window other than that on the driver’s side will not operate.

Turn the power window lock button on if a child is in the vehicle.

*: Not available on all models