Opening/Closing the Power Windows

The power windows can be opened and closed when the power mode is in ON, using the switches on the doors. The driver’s side switches can be used to open and close all of the windows.

The power window lock button on the driver’s side must be switched off (not pushed in, indicator off) to open and close the windows from anywhere other than the driver’s seat.

When the power window lock button is pushed in, the indicator comes on and you can only operate the driver’s window. Turn the power window lock button on if a child is in the vehicle.

WARNING

Closing a power window on someone’s hands or fingers can cause serious injury.

Make sure your passengers are away from the windows before closing them.

Detail
The power windows can be operated for up to 10 minutes after you set the power mode to VEHICLE OFF. Opening either front door cancels this function.

Auto Reverse
If a power window senses resistance when closing automatically, it will stop closing and reverse direction.

The driver’s window auto reverse function is disabled when you continuously pull up the switch.

The auto reverse function stops sensing when the window is almost closed to ensure that it fully closes.

While driving with any of the windows open, you may hear a booming, throbbing, or helicopter-type noise or pressure. This is called wind buffeting. This is a normal occurrence that can be minimized.

If you hear a wind buffeting noise with any of the windows open, lower all of the other windows slightly or open the moonroof*.

Opening/Closing the Windows with Auto-Open/Close Function

Manual operation

To open: Push the switch down lightly, and hold it until the desired position is reached.
To close: Pull the switch up lightly, and hold it until the desired position is reached.

Automatic operation

To open: Push the switch down firmly.
To close: Pull the switch up firmly.

The window opens or closes completely. To stop the window at any time, push or pull the switch briefly.

Opening/Closing Windows without Auto-Open/Close Function

To open: Push the switch down.
To close: Pull the switch up.

Release the switch when the window reaches the desired position.

Opening the Windows with the Remote

To open: Press the unlock button, and then within 10 seconds, press it again and hold it.

If the windows stop midway, repeat the procedure.

Detail
Models with moonroof
If you open the windows with the remote transmitter, the moonroof will open automatically along with them.

All models
You can turn off or on to open the windows with the keyless remote setting using the driver information interface or audio/information screen.
Models with 7-in. Color Touchscreen
Models with 9-in. Color Touchscreen

Opening the Windows with the Key

Pull and hold the outer handle. Insert the key into the key cylinder completely from below the handle.

To open: Unlock the driver’s door with the key. Within 10 seconds of returning the key to the central position, turn the key in the unlock direction and hold it there.

Release the key to stop the windows at the desired position. If you want further adjustment, repeat the same operation.

Detail
Models with moonroof
If you open the windows with the key, the moonroof will open automatically along with them.

* Not available on all models

Recommended topic(s)