Opening the Hood
-
- Park the vehicle on a level surface, and set the parking brake.
- Pull the hood release handle under the driver's side lower corner of the dashboard.
- The hood will pop up slightly.
-
-
- Push the hood latch lever (located under the front edge of the hood on the driver’s side) to the side and raise the hood. Once you have raised the hood slightly, you can release the lever.
-
-
- Remove the support rod from the clamp using the grip. Mount the support rod in the hood.
When closing, remove the support rod and stow it in the clamp, then gently lower the hood. Remove your hand at a height of approximately 12 inches (30 cm) and let the hood close.
-
- Detail
-
NOTICE
Do not open the hood when the wiper arms are raised.
The hood will strike the wipers, resulting in possible damage to the hood and/or the wipers.NOTICE
Do not press the engine cover forcibly. This may damage the engine cover and component parts.
When closing the hood, check that both right and left latches are securely latched.If the hood latch lever moves stiffly, or if you can open the hood without lifting the lever, the latch mechanism should be cleaned and lubricated.Do not open the hood while the Auto Idle Stop function is activated.NOTICE
If a warning message for “hood open” is displayed, either right, left, or both hood locks are not correctly locked in place.
If they are incorrectly locked in place, the hood may open while driving.
Immediately stop in a safe place and close the hood by pressing down on the front of the hood until both locks are latched and the warning disappears.
