Brake/Clutch* Fluid

Specified fluid:

Acura Heavy Duty Brake Fluid DOT 3

Detail: NOTICE
Brake fluid marked DOT 5 is not compatible with your vehicle’s braking system and can cause extensive damage.

If the specified brake fluid is not available, you should use only DOT 3 or DOT 4 fluid from a sealed container as a temporary replacement.

Using any non-Acura brake fluid can cause corrosion and decrease the longevity of the system. Have the brake system flushed and refilled with Acura Heavy Duty Brake Fluid DOT 3 as soon as possible.

If the brake fluid level is at or below the MIN mark, have a dealer inspect the vehicle for leaks or worn brake pads as soon as possible.

Checking the Brake Fluid

The fluid level should be between the MIN and MAX marks on the side of the reserve tank.

Manual transmission models

The brake fluid reserve tank is also used for your vehicle’s clutch fluid. As long as you keep the brake fluid level as instructed above, there is no need for checking the clutch fluid level.

* Not available on all models

Recommended topic(s)