Engine Oil

1. Remove the dipstick (orange loop).
   
2. Wipe the dipstick with a clean cloth or paper towel.
3. Insert the dipstick back all the way into its hole.
4. Remove the dipstick again and check the level. It should be between the upper and lower marks. Add oil if necessary.
   

• Honda Genuine Motor Oil
• Premium-grade 0W-20 detergent oil with an API Certification Seal on the container

This seal indicates the oil is energy conserving and that it meets the American Petroleum Institute's latest requirements.

Use Honda Genuine Motor Oil or another commercial engine oil of suitable viscosity for the ambient temperature as shown.

You may also use synthetic motor oil if it is labeled with the API Certification Seal and is of the specified viscosity grade.

If you change or replace the vehicle's engine oil yourself, you must reset the engine oil life.

1. Press the Display/Information button.
2. Press the / buttons to select the wrench icon and press the Enter button.
3. Press and hold the Enter button for about 10 seconds to enter reset mode.
4. Press the / to select the maintenance item to reset or select All Due Items (you can also select cancel to end the process).
5. Press the ENTER button to reset the selected item and repeat step 4 to reset any other items.