Driving Position Memory System*

You can store two driver’s seat positions (except for power lumbar) with the driving position memory system.
When you unlock and open the driver’s door with a keyless remote, the seat adjusts automatically to one of the two preset positions.


  • DRIVER 1 transmitter is linked to memory button 1.
  • DRIVER 2 transmitter is linked to memory button 2.
The driver’s seat moves rearward depending on the set seating position once you.
  • Stop the vehicle.
  • Put the transmission in P.
  • Set the power mode to VEHICLE OFF.
  • Open the driver’s door.
Once the power mode is in the ACCESSORY position, the driver’s seat moves forward to the DRIVER 1 or 2 preset position.
Detail
Using the audio/information screen, you can disable the automatic seat adjustment function.

The driver's seat easy exit feature can be turned ON/OFF.

System Operation
The system will not operate if:
  • The transmission is out of the P position.
  • Either memory button is pressed while the seat is in motion.
  • The seat position is adjusted while in operation.
  • Either of the memorized positions set fully to the rear.

The system may not recognize a key if:
  • The key is in close proximity to a mobile phone or other wireless device.
  • Both keys are in the vehicle at the same time.
  • The Driving Position Memory System is disabled in customized features.
  • Opening driver’s door without fully grabbing door handle.

Storing a Position in Memory

  1. Set the power mode to ON. Adjust the driver’s seat to the desired position.
  2. Press the SET button.
    • The SET button indicator light will come on.
  3. Press memory button 1 or 2 within five seconds of pressing the SET button.
    • You will hear the beeper, and The SET button indicator light goes off.
Detail
After you press the SET button, the storing operation will be canceled when:
  • You do not press the memory button within five seconds.
  • You readjust the seat position before the double-beep.
  • You set the power mode to any position except ON.

Recalling the Stored Position

  1. Put the transmission into P.
  2. Apply the parking brake.
  3. Press a memory button (1 or 2).

The seat will automatically move to the memorized position.

Detail
The seat will stop moving if you:
  • Press the SET button, or a memory button (1 or 2).
  • Adjust the seat position.
  • Put the transmission into a position other than P.

* Not available on all models

Recommended topic(s)