Driving Position Memory System*

You can store two driver’s seat positions (except for power lumbar) with the driving position memory system.
When you unlock and open the driver’s door with a keyless remote, or keyless access system, the seat adjusts to retracted positions of one of the two preset positions automatically.

The seat will move to the stored position when you set the power mode to ACCESSORY.


  • DRIVER 1 transmitter is linked to memory button 1.
  • DRIVER 2 transmitter is linked to memory button 2.

The driver’s seat moves rearward depending on the set seating position once you

  • Stop the vehicle.
  • Put the transmission in P (continuously variable transmission).
  • Turn the engine off.
  • Open the driver’s door.

Once the power mode is in the ACCESSORY position, the driver’s seat moves forward to the DRIVER 1 or 2 preset position.

Detail
Using the audio/information screen, you can disable the automatic seat adjustment function.

The driver’s seat easy exit feature can be turned ON/OFF.

System Operation
The system will not operate if:
  • Either memory button is pressed while the seat is in motion.
  • The seat positions are adjusted while in operation.
  • Either of the memorized positions is set fully to the rear.

The system may not recognize a key if:
  • The key is in close proximity to a cell phone or other wireless device.
  • Both keys are in the vehicle at the same time.
  • The Driving Position Memory System is disabled in customized features.
  • Opening driver's door without fully grabbing door handle.

Storing a Position in Memory

  1. Set the power mode to ON. Adjust the driver’s seat to the desired position.
  2. Press the SET button.
    • The memory button indicator lights will come on.
  3. Press the memory button 1 or 2 within five seconds of pressing the SET button.
    • Once the seat position has been memorized, you will hear the double-beep.
Detail
After you press the SET button, the storing operation will be canceled when:
  • You do not press the memory button within five seconds.
  • You readjust the seat position before the double-beep.
  • You set the power mode to any position except ON.

Recalling the Stored Position

Continuously variable transmission models
  1. Put the transmission into P.
  2. Press a memory button (1 or 2).
Manual transmission models
  1. Apply the parking brake.
  2. Press a memory button (1 or 2).

The seat will automatically move to the memorized position.

Detail
The seat will stop moving if you:
  • Press the SET button or memory button 1 or 2.
  • Adjust the seat position.
  • Put the transmission into a position other than P (continuously variable transmission).
  • Release the parking brake (manual transmission).

* Not available on all models

Recommended topic(s)