If you want to manually switch the headlights between high beam and low beam, follow either of the procedures below. Note that when you do this, the auto high beam indicator will turn off and the auto high beam will be deactivated.
| Using the lever: | Pull the lever toward you for flashing the high beams then release it within about one second while driving. | To reactivate the auto high beam, pull the lever toward you for flashing the high beams then release it while driving. The auto high beam indicator will come on. |
| Using the light switch: | Turn the light switch to
 .
|
To reactivate the auto high beam, turn the light switch to AUTO when the lever is in the low beam position, the auto high beam indicator will come on. |