Indicators

Indicator
Name
On/Blinking
Explanation
U.S.
Canada
Parking Brake and Brake System Indicator (Red)
  • Comes on when the parking brake is applied, and goes off when it is released.
  • The beeper sounds and the indicator comes on if you drive with the parking brake applied.
  • Comes on for about 30 seconds when you apply the electric parking brake while the power mode is in ACCESSORY or VEHICLE OFF, then goes off.
  • Stays on for about 30 seconds when you set the power mode to VEHICLE OFF while the electric parking brake is applied, then goes off.
  • Comes on when the brake fluid level is low.
Indicator
Name
On/Blinking
Explanation
U.S.
Canada
Parking Brake and Brake System Indicator (Red)
  • Comes on if there is a problem with the brake system.
Indicator
Name
On/Blinking
Explanation
U.S.
Canada
Parking Brake and Brake System Indicator (Amber)
  • Comes on if there is a problem with a system related to braking other than the conventional brake system.
  • Comes on while driving - Avoid high speeds and sudden braking. Take the vehicle to a dealer immediately.
  • Comes on if there is a problem with the electric parking brake system and/or the automatic brake hold system.
  • Stays on constantly - Avoid using the parking brake and have your vehicle checked by a dealer immediately.
  • Comes on if the brake system is deactivated temporarily after the battery has been disconnected, then re-connected.
  • Drive a short distance at more than 12 mph
    (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer.
  • Comes on if there is a problem with the radar sensor.
  • Indicator may come on temporarily when the Maximum Load Limit is exceeded.
  • Stays on constantly - Have your vehicle checked by a dealer.
Automatic Brake Hold System Indicator
  • Comes on when the automatic brake hold system is on.
U.S.
Canada
Automatic Brake Hold Indicator
  • Comes on when the automatic brake hold is activated.
Indicator
Name
On/Blinking
Explanation
Malfunction Indicator Lamp
  • After you have set the power mode to ON, the vehicle performs system checks.
    However, if the readiness codes have not been set by that time, this indicator will blink five times and then go off.
  • Comes on if there is a problem with the emissions control systems.
  • Blinks when a misfire in the engine’s cylinders is detected.
Charging System Indicator
  • Comes on when there is a problem with the charging system.
Gear Position Indicator
  • Indicates the current gear selection.
M (sequential mode) Indicator/Sequential Mode Gear Selection Indicator
  • Comes on when the sequential mode is applied.
Indicator
Name
On/Blinking
Explanation
Transmission System Indicator
  • The current gear selection blinks if the transmission system has a problem.
  • Blinks while driving - Performance may be reduced. Avoid sudden starts and acceleration and have your vehicle checked by a dealer immediately.
  • The indicated current gear selection blinks if you cannot put the transmission into R due to a transmission system failure.
  • The indicated current gear selection blinks if the transmission system has a problem and the performance of the vehicle is reduced.
  • Avoid sudden starts, sudden acceleration and high speed, and have your vehicle checked by a dealer immediately.
  • The indicated current gear selection blinks if the transmission system has a problem and the paddle shifters cannot be used.
  • Have your vehicle checked by a dealer immediately.
  • The current gear position or all the gear positions blink if there is a problem with the transmission and the vehicle is no longer able to run.
  • Immediately park your vehicle in a safe place.
  • Have your vehicle checked by a dealer.
  • The current gear position or all the gear positions blink if there is a problem with the transmission and it is not possible to select P.
Indicator
Name
On/Blinking
Explanation
Seat Belt Reminder Indicator
  • Blinks and the beeper sounds for a few seconds if you are not wearing a seat belt when you set the power mode to ON, then the indicator comes on.
  • If the front passenger is not wearing a seat belt, the indicator comes on a few seconds later.
  • Comes on for a while when the rear seat belt is unfastened while the power mode in ON.
  • Blinks while driving if you and/or any passenger has not fastened a seat belt. The beeper sounds and the indicator blinks at regular intervals.
  • The beeper stops and the indicator goes off when you and the passengers fasten their seat belts.
  • Stays on after you and/or the passengers have fastened the seat belt(s) - A detection error may have occurred in the sensor. Have your vehicle checked by a dealer.
Low Fuel Indicator (Amber)
  • Comes on when the fuel reserve is running low (approximately 2.77 U.S. gal/10.5 Liter left).
  • Refuel your vehicle as soon as possible.
  • Blinks if there is a problem with the fuel gauge.
  • Have your vehicle checked by a dealer.
Indicator
Name
On/Blinking
Explanation
Anti-lock Brake System (ABS) Indicator
  • Comes on if there is a problem with the ABS.
  • Stays on constantly - Have your vehicle checked by a dealer. With this indicator on, your vehicle still has normal braking ability but no anti-lock function.
Supplemental Restraint System Indicator
  • Comes on if a problem with any of the following is detected:
    • Supplemental Restraint System
    • Side airbag system
    • Side curtain airbag system
    • Seat belt tensioner
  • Stays on constantly - Have your vehicle checked by a dealer.
Electric Power Steering (EPS) System Indicator
  • Comes on if there is a problem with the EPS system.
Indicator
Name
On/Blinking
Explanation
Vehicle Stability AssistTM (VSA®) System Indicator
  • Blinks when VSA® or trailer stability assist is active.
-
  • Comes on if there is a problem with the VSA® system, brake assist system, hill start assist system, starting assist brake function, agile handling assist, or trailer stability assist.
  • Comes on if the VSA® system is deactivated temporarily after the battery has been disconnected, then re-connected.
  • Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer.
Vehicle Stability AssistTM (VSA®) OFF Indicator
  • Comes on when you partially disable VSA®.
  • Comes on in TRAIL* and SAND* drive modes.
Indicator
Name
On/Blinking
Explanation
Low Tire Pressure/TPMS Indicator
  • Comes on if the tire pressure of any of the tires becomes low.
  • Comes on while driving - Stop in a safe place, check tire pressures, and inflate the tire(s) if necessary.
  • Blinks for about one minute, and then stays on if there is a problem with the TPMS with Tire Fill Assist, or when a spare tire is temporarily installed.
  • Blinks and remains on - Have your vehicle checked by a dealer. If the vehicle is fitted with a spare tire, get your regular tire repaired or replaced and put back on your vehicle as soon as you can.
Turn Signal and Hazard Warning Indicators
  • Blinks when you operate the turn signal lever.
  • Blinks along with all turn signals when you press the hazard warning button.
Lights On Indicator
  • Comes on when the parking, tail, and other external lights are on.
High Beam Indicator
  • Comes on when the high beam headlights are on.
-
Auto High-Beam Indicator
  • Comes on when all the operating conditions of the auto high-beam are met.
Fog Light Indicator*
  • Comes on when the fog lights are on.
Indicator
Name
On/Blinking
Explanation
Hill Descent Control System Indicator (White/Green)
  • Lights up in white when the Hill Descent Control System is on and ready to use.
  • Lights up in green when the Hill Descent Control System is in operation.
System Message Indicator
  • Comes on along with a beep when a problem is detected. A system message on the driver information interface appears at the same time.
  • Refer to the Indicators information in this chapter when a system message appears on the driver information interface. Take the appropriate action for the message.
  • Models with A-type meter
  • While the indicator is on, press the (home) button, and select Warnings to see the message again.
  • The driver information interface will not return to the normal screen unless the warning is canceled, or the (home) button is pressed.
  • Models with B-type meter
  • While the indicator is on, roll the right selector wheel to see the message again.
  • The driver information interface will not return to the normal screen unless the warning is canceled, or the right selector wheel is rolled.
Indicator
Name
On/Blinking
Explanation
SPORT Mode Indicator*
  • Comes on when you set the drive mode to SPORT.
    Models with A-type meter
  • The ambient meter remains light up in red as long as SPORT mode is selected.
  • Models with B-type meter
  • The ambient meter goes off and gauges in the instrument panel light up in red as long as SPORT mode is selected.
NORMAL Mode Indicator
  • Comes on when you set the drive mode to NORMAL.
ECON Mode Indicator
  • Comes on when you set the drive mode to ECON.
SNOW Mode Indicator
  • Comes on when you set the drive mode to SNOW.
Indicator
Name
On/Blinking
Explanation
TRAIL Mode Indicator*
  • Comes on when you set the drive mode to TRAIL.
SAND Mode Indicator*
  • Comes on when you set the drive mode to SAND.
TOW Mode Indicator
  • Comes on when you set the drive mode to TOW.
Low Temperature Indicator*
  • Comes on when the engine coolant temperature is low.
  • If the indicator stays on after the engine has reached normal operating temperature, there may be a problem with the temperature sensors. Have your vehicle inspected by a dealer.
Indicator
Name
On/Blinking
Explanation
Models with A-type meter
Models with B-type meter
Immobilizer System Indicator
  • Blinks if the immobilizer system cannot recognize the key information.
  • Blinks - You cannot start the engine. Set the power mode to VEHICLE OFF, then select the ON mode again.
    Canadian models
    Depress and hold the brake pedal before setting the power mode to ON.
  • Repeatedly blinks - The system may be malfunctioning. Have your vehicle checked by a dealer.
  • Do not attempt to alter this system or add other devices to it. Electrical problems can occur.
Models with A-type meter
Models with B-type meter
Security System Alarm Indicator
  • Blinks when the security system alarm has been set.
Indicator
Name
On/Blinking
Explanation
Auto Idle Stop OFF Indicator
  • Comes on when the Auto Idle Stop system has been turned off by the Auto Idle Stop OFF button.
Auto Idle Stop System Indicator (Amber)
  • Blinks if there is a problem with the Auto Idle Stop system.
  • Have your vehicle checked by a dealer.
Auto Idle Stop Indicator (Green)
  • Comes on when Auto Idle Stop is in operation. The engine automatically shuts off.
Indicator
Name
On/Blinking
Explanation
Auto Idle Stop Suspend Indicator
  • Comes on while Auto Idle Stop is temporarily suspended in the following situations.
-
  • Brake pedal is not fully pressed
  • Depress the brake pedal firmly.
  • The transmission is in a position other than D
  • System charging is prioritized
  • Climate control system is prioritized
  • Engine coolant temperature is not in operating range
  • SNOW, TOW, SPORT*, TRAIL*, or SAND* mode is selected.
  • The battery temperature is too low.
  • Auto Idle Stop does not activate for some reason.
-
  • If you press and hold the Auto Idle Stop OFF button, you can select whether to display the status messages or not.
Indicator
Name
On/Blinking
Explanation
Adaptive Cruise Control (ACC) with Low Speed Follow Indicator (Amber)
  • Comes on if there is a problem with ACC with Low Speed Follow.
  • Comes on while driving - Have your vehicle checked by a dealer.
  • Comes on if the ACC with Low Speed Follow is deactivated temporarily after the battery has been disconnected, then re-connected.
  • Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer.
  • Indicator may come on temporarily when the Maximum Load Limit is exceeded.
  • ACC with Low Speed Follow has been automatically canceled.
  • Make sure the total load is within the Maximum Load Limit.
  • Stays on constantly - Have your vehicle checked by a dealer.
Adaptive Cruise Control (ACC) with Low Speed Follow Indicator
(White/Green)
  • Lights up in white when you press the button.
  • Lights up in green when you press the RES/+/SET/− switch up or down.
Indicator
Name
On/Blinking
Explanation
Lane Keeping Assist System (LKAS) Indicator (Amber)
  • Comes on if there is a problem with the LKAS.
  • Stays on constantly - Have your vehicle checked by a dealer.
  • Indicator may come on temporarily when the Maximum Load Limit is exceeded.
  • Make sure the total load is within the Maximum Load Limit.
  • Stays on constantly - Have your vehicle checked by a dealer.
Lane Keeping Assist System (LKAS) Indicator (White/Green)
  • Lights up in white when you press the LKAS button.
  • Lights up in green when the LKAS is in operation.
Cruise Mode Indicator
(White/Green)
  • Lights up in white when you change to cruise mode.
  • Lights up in green when you have set a speed for cruise control.
Adaptive Cruise Control (ACC) with Low Speed Follow Interval Indicator*
  • Comes on when Adaptive Cruise Control (ACC) with Low Speed Follow indicator comes on.
  • Each time you press the interval button, the following interval (the interval behind a vehicle detected ahead of you) setting cycles through extra long, long, middle, and short following intervals.
Indicator
Name
On/Blinking
Explanation
Safety Support Indicator (Amber)
  • Comes on if there is a problem with Road Departure Mitigation system, CMBSTM, Low Speed Braking Control* or blind spot information system*.
  • Stays on constantly - Have your vehicle checked by a dealer.
    Models with Parking Sensor System
  • Comes on if there is a problem with the parking sensor.
  • Check if the area around the sensor(s) is covered with mud, ice, snow, etc. If the indicator stays on even after you clean the area, have the system checked by a dealer.
  • Indicator may come on temporarily when the Maximum Load Limit is exceeded.
  • Make sure the total load is within the Maximum Load Limit.
  • Stays on constantly - Have your vehicle checked by a dealer.
  • Comes on if the Road Departure Mitigation system, CMBSTM and Low Speed Braking Control* are deactivated temporarily after the battery has been disconnected and then re-connected.
  • Drive a short distance at more than 12 mph (20 km/h). The indicator should go off. If it does not, have your vehicle checked by a dealer.
Indicator
Name
On/Blinking
Explanation
Safety Support Indicator (Amber)
  • Comes on when the Road Departure Mitigation system and/or CMBSTM shuts itself off.
  • Indicator may come on temporarily if the radar sensor cannot detect any objects when passing through an enclosed space such as a tunnel, or driving on an open road without any structures nearby.
  • The area around the radar sensor is blocked by dirt, mud, etc. Stop your vehicle in a safe place and wipe the debris off with a soft cloth. Indicator may take some time to go off after the radar sensor is cleaned.
  • Have your vehicle checked by a dealer if the indicator does not go off even after you have cleaned the radar sensor.
  • Stays on - The temperature inside the camera is too high.
    Use the climate control system to cool down the camera.
    The system activates when the temperature inside the camera cools down.
Indicator
Name
On/Blinking
Explanation
Safety Support Indicator (Amber)
  • Comes on when the Road Departure Mitigation system and/or CMBSTM shuts itself off.
  • Stays on - The area around the camera is blocked by dirt, mud, etc. Stop your vehicle in a safe place and wipe the debris off with a soft cloth.
  • Have your vehicle checked by a dealer if the indicator and message are still displayed even after you have cleaned the area around the camera.
  • It may come on when the ambient conditions are dark, such as when driving in a tunnel, or at night, dawn, or dusk.
    Models with Low Speed Braking Control
  • Comes on when mud, snow, or ice accumulates in the vicinity of the sonar sensor.
    Models with blind spot information system
  • Comes on when mud, snow, or ice accumulates in the vicinity of the blind spot information system sensor.
  • Comes on when the temperature of the blind spot information system sensor is high.
  • Comes on while driving - Something may be interfering with the blind spot information system sensor. Check the vicinity of the blind spot information system sensor and remove any obstacles.
  • The system will return to normal when the temperature cools down.
Indicator
Name
On/Blinking
Explanation
Safety Support Indicator (Green/Gray)
  • Lights up in green when Road Departure Mitigation system, CMBSTM, Low Speed Braking Control*, blind spot information system*, and Parking Sensor System* are on.
  • Lights up in green and gray when Road Departure Mitigation system, CMBSTM, Low Speed Braking Control*, blind spot information system*, or Parking Sensor System*, or any two, three or four of these systems are off.
  • Lights up in gray when Road Departure Mitigation system, CMBSTM, Low Speed Braking Control*, blind spot information system*, and Parking Sensor System* are off.

* Not available on all models