Checking the Procedure

When the READY indicator does not come on the gauge, check the following items and take appropriate action.

Checklist
Condition
What to Do
Check if the related indicator or driver information interface messages come on.
The Temperature is too cold for vehicle to operate message appears.
  • You must wait for an increase in the ambient temperature or move the vehicle to a warmer location.
  • Contact a dealer if necessary.
The To start, touch start button with emblem side of remote message appears.
Check the shift position.
The transmission is not in P.
Put the transmission into P.
Check the immobilizer system indicator.
When the immobilizer system indicator is blinking, the power system cannot be turned on.
Check the power system starting procedure.
Follow the instructions, and try to start the power system again.
Check the fuses.
Check all fuses, or have your vehicle checked by a dealer.

If you cannot turn on the power system after checking all the items in the list above, have your vehicle checked by a dealer.

If you must start the vehicle immediately, use an assisting vehicle or booster battery to jump start it.

Depending on the situation, it may be possible to temporarily turn on the power system using the emergency power system on procedure.

Recommended topic(s)