1. Do not modify your vehicle in a manner that may affect its handling, stability, or reliability, or install non-Genuine Honda parts or accessories that may have a similar effect.
2. Even minor modifications to vehicle systems can affect overall vehicle performance.
3. Always make sure all equipment is properly installed and maintained, and do not make any modification to your vehicle or its systems that might cause your vehicle to no longer meet federal, state, province, territory, and local regulations.
4. The on-board diagnostic port (OBD-II/SAE J1962 connector) installed on this vehicle is intended to be used with automobile system diagnostic devices or with other devices that Honda has approved. Use of any other type of device may adversely affect the vehicle’s electronic systems or allow them to be compromised, possibly resulting in a system malfunction, drained 12-volt battery, or other unexpected problems.
5. Do not modify or attempt to repair any of the electrical components.

When installing accessories, check the following:

1. Do not install accessories on the windshield. They can obstruct your view and delay your reaction to driving conditions.
2. Do not install any items other than Honda Genuine Accessories designated for your vehicle over areas containing airbags.
   Items other than Honda Genuine Accessories designated for your vehicle installed in these areas may interfere with proper operation of the vehicle’s airbags or may be propelled into you or another occupant if the airbags deploy.
3. Be sure electronic accessories do not overload electrical circuits or interfere with proper operation of your vehicle.

   Checking Fuses

4. Before installing any electronic accessory, have the installer contact a dealer for assistance. If possible, have a dealer inspect the final installation.

If any Honda Genuine Accessories become inoperable, refer to the separate accessory owner’s manual (if applicable) or consult a dealer for assistance to troubleshoot the potential faulty condition.