If the Keyless Remote Battery is Weak

If the beeper sounds, the To start, touch start button with emblem side of remote message appears on the driver information interface, and the ENGINE START/STOP button flashes, and the engine won’t start, start the engine as follows:

  1. Press the ENGINE START/STOP button.
    • The beeper sounds and the ENGINE START/STOP button flashes for about 30 seconds.
  2. Touch the center of the ENGINE START/STOP button with the A logo on the keyless remote while the ENGINE START/STOP button is flashing. The buttons on the keyless remote should be facing you.
    • The beeper sounds, and the ENGINE START/STOP button stays on for about 10 seconds.
  1. Depress the brake pedal (continuously variable transmission) or clutch pedal (manual transmission) and press the ENGINE START/STOP button while the ENGINE START/STOP button is on.
    • The engine starts.
    • If you don’t depress the pedal, the mode will change to ACCESSORY.
Recommended topic(s)